wait… sounds logically? man that makes no sense whatsoever. i mean come on why leave the verb out when you can just have proper sentence structure all time?
sheesh some people
That is reminiscent of my van’s door… My dad tried to fix the windows (the motor seems to burn out or something when putting them back up) and ended up screwing up the window switches as well was pulling the plastic inside half of the door off. Now it dangles there held only by the speaker, lock, and window wires.
No they don’t. The mutiplicity of screws, bolts, clips, tape, not to mention handles that you have to remove first… …did I mention I hate working on doors?
Gorgon… if your a mechanic then you would know that particular door has plastic door clips, (these f’in things https://www.dkhardware.com/images/items/CP998430_32567.gif ) not screws and bolts… and the door panel comes off very easy if it gets stuck on something like… the floor from the door panel itself warping over time. Once these things come un-done you have to buy and replace them again… They are pain!
What’s the fail here? Door panel came off the door? On an old crappy car? LOL! Or someone dismantled the panel and stowed it in the door opening? Wow, that’s hillarious!
My Neon did the exact same thing, except it was the driver’s door, it was mid-winter in Chicago’s brutal ‘09 cold spell, and it shattered the window in the process.
It is also staged. You can NOT get the door panel to come off like that “accidentally” without breaking out the door panel around the door handle or breaking off the door handle itself – the door doesn’t pull straight off the door, but has to go sideways before pulling off.
Also note the lack of the weather sheeting that lines the inside of the door structure when the car comes from the factory.
And there is NO way the door trim panel could have jammed inside the opening for the door. There is nothing for it to catch on unless it is grossly oversized.
You can NOT pull the door off that way. There is a screw within the door panel you have to remove, you have to pop off an acess cover under the handle, then pry the trim tabs off carefully, then slide the door forward and out. If it just “stuck”, then you would have had broken plastic everywhere – like 90% of these panels you find in a salvage yard, where the people had no clue how to properly remove them.
And as I pointed out, the weather sheeting has been removed in this picture.
And there is NOTHING for the trim panel to catch on inside the car.
There is ZERO chance this isn’t staged.
The car may have needed repair and the owner may have botched the job royally – but you’re talking an insane level of screw-up on a repair job here.
This is a Sable or Taurus. I have the same car and the same fu*&in thing happens to me, its been fixed multiple times yet it keeps happening.
*Prepare for all your door handles to start sticking so when an unsuspected that sits in your back seat doesn’t push it back down from the outside, the car door goes flying open when you go around a turn! That’s a great FAIL as well.
WAY TO GO FORD!!! KEEP SLACKEN AT THAT ASSEMBLY LINE!!!
And to you people thinking its screws and bolts and crap… your wrong they are little plastic cilps… once they come uncliped you have to buy them, and fix it again cause they are the “pop in” kind…
No silver-linings in this fail?
Maybe it’s a window to a new world… or just a wind up.
Oh, Narnia!
Failnia?
Lolnia?
.:…:.:::.:. :..:.:: ::..:.:::
You must decipher this message before you can reach Regirock
LET MI SHOW MA POKEMANZ
Yes. I went there.
went there, saw how pathetic your life is, and killed yourself
Carnia?
Crapnia?
cacnia!
Again with the pokemon?
Oh and btw…
California?
would explain the extra-strong child lock
Repost fail
They really should invent inertia proof doors.
That’d stop ‘em flying off the handle!
But those pesky mice keep chewing through metal! With Dynamite!!
The new child safe version…
Yeah, sounds logically
wait… sounds logically? man that makes no sense whatsoever. i mean come on why leave the verb out when you can just have proper sentence structure all time?
sheesh some people
FIRST ZOMG
OMFG UR FIRST LEIK OMFG U DESERVE LEIK A NATIONAL HONOR FOR THAT!
And an Assassination
This is why I collect weapononry.
I bet they find a hand full of loose change and a TV remote.
And a rectangular, plastic wrapped package of strange green leafy matter.
GGSBF?
So that’s where the kids always put away the spinach!
the kind of magic spinach that gives popeye his powers
I thought that it might be oregano.
They’ll do thyme for that.
Unless they put it ripe back where they found it.
i find this conversation curryious, parsley because of the good wordplays, and partly because it remints me of good ‘ol times
you mean “good o’l thymes?”
Hold on.. i callz bob teh builder.
Hold on…there’s a problem with the wiring of your spell checker.
Liek mai spel checkr (stoopid think never works)
I hear that you can get a really good spell checker from Hogwarts.
How did that original Hog get the warts anyway?
And why would they name a school after some promiscuous bacon!?
…
lol
>_>
<(^.^)o.O)<
discriminating tariff
The car has so much horsepower they installed a special horsedoor to keep it in check. No fail here.
Now we can move hourses!
So, you would say door WIN? *lip wobbles*
And yet it doesn’t look like a BMW? Curiouser and curiouser.
How did THAT happen?
What held the door trim in place?
Odd, very odd.
Oh, and I HATE working on doors.
Doors and heater cores. Ugh.
Honey, the Door and the Heater Core are fighting again!
The owner has OCD. The trim has been caked to junk on the back seat.
That is reminiscent of my van’s door… My dad tried to fix the windows (the motor seems to burn out or something when putting them back up) and ended up screwing up the window switches as well was pulling the plastic inside half of the door off. Now it dangles there held only by the speaker, lock, and window wires.
YEEEEEEEAAAAAAAAHHHHHH FIRST!!!
12:40
Phail
this is a set up fail, door panels just don’t fall off!
No they don’t. The mutiplicity of screws, bolts, clips, tape, not to mention handles that you have to remove first… …did I mention I hate working on doors?
YES….YES THEY DO! THE SAME THING HAPPENED TO ME THAT’S A SABLE OR A TAURUS! LOOK IT UP! It happens all the time to that car!
Gorgon… if your a mechanic then you would know that particular door has plastic door clips, (these f’in things https://www.dkhardware.com/images/items/CP998430_32567.gif ) not screws and bolts… and the door panel comes off very easy if it gets stuck on something like… the floor from the door panel itself warping over time. Once these things come un-done you have to buy and replace them again… They are pain!
I told him not to use American locks on Chinese plastic
What’s the fail here? Door panel came off the door? On an old crappy car? LOL! Or someone dismantled the panel and stowed it in the door opening? Wow, that’s hillarious!
They had to take the door panel off so it would keep the junk in the back seat from falling out when they open the door. It’s obvious.
Didn’t this happen on Top Gear? I seem to recall Jeremy Clarkson purchasing an old car and the door doing that.
I Believe it was on the British Leyland Challenge with the Rover SD-1. That challenge was classic!
Its a stable door for cars, its the new in thing!
is this a reliant K car?
HAHAHAHAHAHAHA thats awesome!
…its in mint condition *door comes apart*
just sign here
I’m a door half-open kind of guy
The car was probably made by British Layland.
You put your weed in there man!
Can you believe it’s a car as reliable as a Ford Taurus?
My Neon did the exact same thing, except it was the driver’s door, it was mid-winter in Chicago’s brutal ‘09 cold spell, and it shattered the window in the process.
I’m pretty sure that’s my ex-boyfriend’s car… Same door, same car model, same color. HA!
I wonder what the back seat passenger’s face looked like when this happened…
If it was anything like mine when I first realized it was broke… something between “HOLYSNAPI’MSORRY.” and utter confusion.
This is a 1996-1999 Ford Taurus.
It is also staged. You can NOT get the door panel to come off like that “accidentally” without breaking out the door panel around the door handle or breaking off the door handle itself – the door doesn’t pull straight off the door, but has to go sideways before pulling off.
Also note the lack of the weather sheeting that lines the inside of the door structure when the car comes from the factory.
And there is NO way the door trim panel could have jammed inside the opening for the door. There is nothing for it to catch on unless it is grossly oversized.
This is nothing but a STAGE FAIL
um, NO. my brother’s car (which i think this is my brother’s car) is exactly like this. so you are wrong and over-thinking the picture.
I have a 1997 myself.
You can NOT pull the door off that way. There is a screw within the door panel you have to remove, you have to pop off an acess cover under the handle, then pry the trim tabs off carefully, then slide the door forward and out. If it just “stuck”, then you would have had broken plastic everywhere – like 90% of these panels you find in a salvage yard, where the people had no clue how to properly remove them.
And as I pointed out, the weather sheeting has been removed in this picture.
And there is NOTHING for the trim panel to catch on inside the car.
There is ZERO chance this isn’t staged.
The car may have needed repair and the owner may have botched the job royally – but you’re talking an insane level of screw-up on a repair job here.
This happened on top gear accidentally.
Perhaps – with a different car.
Top Gear, a British show, wouldn’t waste their time on a vehicle not available to them.
Made in china
Ouch! This is quite piercing Dx Ouch ouch..
Must be an American made car…
This is a Sable or Taurus. I have the same car and the same fu*&in thing happens to me, its been fixed multiple times yet it keeps happening.
*Prepare for all your door handles to start sticking so when an unsuspected that sits in your back seat doesn’t push it back down from the outside, the car door goes flying open when you go around a turn! That’s a great FAIL as well.
WAY TO GO FORD!!! KEEP SLACKEN AT THAT ASSEMBLY LINE!!!
And to you people thinking its screws and bolts and crap… your wrong they are little plastic cilps… once they come uncliped you have to buy them, and fix it again cause they are the “pop in” kind…
I fought the door and the-
Door won.
And an Assassination